top of page

The CS10 is a two-way, full-range intelligent loudspeaker, intended for use in a wide variety of applications. Utilizing Adamson's proprietary network platform, the CS10 employs a redundant MILAN scheme with the ability to daisy-chain networked audio between multiple sources, an analog XLR input and output, as well as on-board DSP and amplication. All features of the loudspeaker are controlled and monitored through Adamson's proprietary CS software.

Acoustically, the CS10 contains 2x 10-inch Kevlar Neodymium transducers and a 4" compression driver. The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 110° x 10° (H x V). The chamber's efficiency allows for increased vertical dispersion without sacricing high frequency presence in the farfield. Patented Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.

The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with a male and female XLR connector, 2x etherCON connections and an in and through powerCON TRUE1 connection.

Please refer to the CS10 User Manual for further information.


    • Réponse en fréquence (+/- 3dB) : 60Hz - 18kHz
      Directivité Nominale (-6dB) H x V : 110° x 10°
      SPL Max Peak : 141.3 dB
      LF : 2 x HP ND10-LM10 " Kevlar & Néodyme
      HF : 1 x NH 4" Diaphragm / 1.5" Exit Compression Driver
      Rigging : Slidelock Rigging System
      Connexion : Power: powerCON TRUE1 Network: 2x etherCON Analog: 2x XLR
      Hauteur Face avant (mm / in) : 265 / 10.4
      Hauteur Arrière (mm / in) : 178 / 7
      Largeur (mm / in) : 737 / 29
      Profondeur (mm / in) : 526 / 20.7
      Poids : 31 Kg
      Amplification : 2 channel Class-D, 2400 W total output
      Voltage : 100 - 240 V
      Consommation : 0.45 A rms idle, 1.7 A rms long-term, 10 A max peak

Adamson, CS-SERIES

bottom of page