top of page

The CS118 Subwoofer is the companion subwoofer to the CS7 & CS7p. Utilizing Adamson's proprietary network platform, the CS118 employs a redundant MILAN scheme with the ability to daisy-chain networked audio between multiple sources, an analog XLR input and output, as well as on-board DSP and amplification. All features of the subwoofer are controlled and monitored through Adamson’s proprietary CS software.

The CS118 is front-loaded with a light weight, long excursion, 18" ND18-S Kevlar Neodymium driver utilizing Adamson's Advanced Cone Architecture and a 4" voice coil for exceptional power handling. This driver is mounted in an ultra-efficient enclosure, designed to reproduce clean, musical low frequency information.

The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with a male and female XLR connector, 2x etherCON connections and an in and through powerCON TRUE1 connection. The rigging system offers a wide variety of possible solutions.

Please refer to the CS118 User Manual for further information.


    • Réponse en fréquence (+/- 3dB) : 35Hz - 80kHz
      SPL Max Peak SPL: 133 dB
      LF : HP ND18-S 18" Kevlar & Néodyme
      Rigging : Integrated Rigging System
      Connexion : Power: powerCON TRUE1 Network: 2x etherCON Analog: 2x XLR
      Hauteur (mm / in): 508 / 20
      Largeur (mm / in) : 527 / 20.75
      Profondeur (mm / in) : 495 / 19.5
      Poids : 34 Kg
      Amplification : Single channel Class-D, 3000 W total output
      Voltage : 100 - 240 V
      Consommation : 0.45 A rms idle, 1.8 A rms long-term, 11 A max peak
      Processing : Embarqué | Propriétaire

Adamson, CS-SERIES

bottom of page