top of page

The CS7 is a two-way, full-range intelligent loudspeaker, intended for use in a wide variety of applications. Utilizing Adamson's proprietary network platform, the CS7 employs a redundant MILAN scheme with the ability to daisy-chain networked audio between multiple sources, an analog XLR input and output, as well as on-board DSP and amplification. All features of the loudspeaker are controlled and monitored through Adamson's proprietary CS software.

Acoustically, the CS7 contains 2x 7-inch Kevlar Neodymium transducers and a 3" compression driver. The critically optimized sound chamber produces a slightly curved wavefront with a nominal dispersion pattern of 100°x 12.5° (H x V). The chamber's efficiency allows for increased vertical dispersion without sacrificing high frequency presence in the farfield. Adamson's Controlled Summation Technology further eliminates low-mid lobing normally associated with 2-way line source systems.

The cabinet construction uses marine grade birch plywood as well as aircraft grade steel and aluminum, and is equipped with a male and female XLR connector, 2x etherCON connections and an in and through powerCON TRUE1 connection. Please refer to the CS7 User Manual for further information.


    • Réponse en fréquence (+/- 3dB) : 80Hz - 18kHz
      Directivité Nominale (-6dB) H x V : 100° x 12.5°
      SPL Max Peak : 138 dB
      LF : 2 x HP ND7-LM16, 7" Kevlar & Néodyme
      HF : 1 x NH3-8 3" / 1.4" Exit Compression Driver
      Rigging : Slide Lock Rigging System
      Connexion : Power: powerCON TRUE1 Network: 2x etherCON Analog: 2x XLR
      Hauteur Face avant (mm / in): 203 / 8
      Hauteur Arrière (mm / in): 122 / 4.8
      Largeur (mm / in): 527 / 20.75
      Profondeur (mm / in): 411 / 16.2
      Poids : 17.5 Kg
      Amplification : 2 channel Class-D, 2400 W total output
      Voltage : 100 - 240 V
      Consommation : 0.45 A rms idle, 1.5 A rms long-term, 9 A max peak
      Processing : Embarqué | Propriétaire

Adamson, CS-SERIES

bottom of page